STM32F0 Discovery

Tested Environment:

CPU
 IDE
 OS
 Ethernet
 RS-232
 RS-485
STM32F0 Discovery
 Raisonance Ride7
 N/A
 N/A
 Yes N/A

Characteristics:

Code size in KB (approximate figures)
CPU Read Coils Read Discrete Inputs
 Read Coils + Write Coils
 Read Input Registers
 Read Holding Registers
 Read Holding registers + Write Holding Registers
 All 8 Functions
STM32F0 Discovery
 - - - - - - -

Verify the code before buying

RTips Technologies provides a hex file so that the customer can test the code before buying the library

Modbus Slave RTU - Hex file download

After downloading the hex file make sure you follow the steps for proper communication

  1. For testing the Modbus Slave use Modbus Master (Eg: download Wintech Modscan32 http://www.win-tech.com/html/modscan32.htm which is available free or you can use any Modbus Master which you are familiar). The below steps are written by taking Modscan as reference however configurations remains same for any Modbus Master.
  2. Load the hex file 
  3. For RTU: Open Modscan, go to Connection->Connect a dialog box appears where you need to set the following configuration.
    1. Baud Rate: 9600 
    2. Word Length: 8
    3. Parity: None 
    4. Stop Bits: 1 as shown below

  4. After connecting, set Address: 0001 Length: 10 ( As we are sending 10 dummy data values from the Modbus Slave, anything beyond 10 shows 'Exception Response') Device Id: 1
  5. Now the Modbus master will be ready to communicate with the Slave.